The original feeling remains with the latest ORIGIN wing. True to its name, the ORIGIN embodies the ease and comfort of our original wings, while incorporating all the innovations and advancements weve developed over the years.

FULLDESCRIPTION

New for this version, the ORIGIN now comes with optimised strap positions, allowing one boom to fit multiple sizes and models across the range for maximum convenience. We have also added a 6.0 m size, providing even more options for riders to find their ideal setup.

An absolute dream in the low end, the ORIGIN is a super comfortable, light, forgiving, and accessible all-round wing that feels effortless to ride. It allows the easiest take-offs with minimal pumping and with just enough speed to get going. Beginners and experts alike will appreciate its very efficient and intuitive pumping thanks to its flexibility, as well as its super smooth take-offs. This wing is the softest and most comfortable one of our range.

The ORIGIN also offers intuitive power delivery with barely any adjustments needed once in the air. Simply sheet in and let it make you foil away. Its controlled speed allows you to ride without excessive effort or fatigue.

The ORIGIN is for everyone. It is the ideal choice for riders looking to spend long hours on the water, those who ride larger foils and boards and need easy power for planing starts, or for beginners looking for a high-quality wing with great potential to evolve and progress.

Its lightness truly sets it apart from our other wings, making it also perfect to freefly in the low end. The ORIGIN is a great addition to your quiver as a light-wind wing.

Design:

The ORIGINs design has been optimised to guarantee as much lightness and comfort as possible.

With our staggered seams, the fabric and its seams work better to keep a smooth and efficient profile and to reduce the deformation of the wings shape under load. The control of the profile is ideal to guarantee total stability and comfort during the ride.

Small radial cuts are implemented on the wingtips and on the back of the strut to spread tensions. Aligning the fibre exactly along the load paths means that stretch can be controlled to a never-before-seen level on a wing.

Located on the back of the strut, our refined Load Diffuser made of overlapping panels of hard Mylar and Dacron further helps maintaining the profile sleek and efficient, leading to the ultimate stability, performances, and longevity.

The strut and the two central segments of the leading edge on each side of the strut are made of HITEX 158g. This high tenacity polyester offers great resistance to elongation and therefore greater durability and performances. The remaining segments of the leading edge are made of Dacron 150g to guarantee lightness and comfort.

The ORIGINs canopy is in TECHNOFORCE/D2 in 52g, while the thicker TECHNOFORCE/D2 in 66g is on the trailing edge. These materials are perfectly distributed to account for the different tensions, high pressures, and weight distribution of each area.

The central strut is completely straight, which allows us to better control its deformation and possible twisting, while reducing drag. As a result, the infill is a bit lower and deforms less, and is extended almost all the way to the back.

Combining fantastic stability and effortless maneuverability, the ORIGIN is a versatile wing perfectly suited for rapid progression and endless fun on the water.

KEY FEATURES

INTERCHANGEABLE WING HANDLES SYSTEM 2025

All our wings are fitted with our interchangeable handle system. Whether youre looking for a light and comfortable setup with soft handles, a more direct and aggressive ride with hard handles or something in between with our innovative hybrid handles, weve got you covered.

An accessible, light, versatile and forgiving wing

Legendary pumping and easy take-offs

Optimized design for extra lightness and comfort

Impressive freefly abilities in light wind

Fantastic stability and manoeuvrability

Perfectly suited to rapid progress and fun on the water

TECHNOLOGY

SAIL ENGINEERING

Sail engineering is the science of controlling our design and its behavior while flying. These features have been created with one goal in mind: Mastering the kites loads to maintain the desired shape for the longest time.

1 WARP TENSION LINE

Woven fabrics feature a longitudinal 0 yarn (Warp) and a transversal 90 yarn (Weft). Therefore, a fabric has great elongation resistance and strength capacities if you apply tension at 0 or 90 along the yarns. But it will deform and stretch when tension is applied at, lets say, 45.

2 LOAD CONTROL PANELING

When engineering the load control paneling, we make sure that fabrics panels are warp/weft oriented, meaning that the load path runs through the yarns. Fabric and seams are then in the best position to receive tensions and maintain the original kite shape.

3 STAGGERED SEAMS

Most of the kites back lines tension is distributed through the trailing-edge panels and seams. As seams are significantly stiffer than the fabric they join, they tend to strain under loads and therefore deform the profile. The staggered seams break that line of tension by balancing the stiffness between seams and cloth, which helps distribute the load over a wider area and maintain the original shape even under high loads.

4 FABRIC WEIGHT MANAGEMENT

Our sails feature four different cloth weights, from 52 up to 155gr/m. Sail engineering allows us to control our shape and drive load tensions without using heavy fabrics or bulky designs, therefore we can reduce fabrics weight and use. It results in a lighter, optimized kite.

HITEX

To meet the specific needs of the development of wings and kites, and to offer a high-performance and durable product without using inaccessible materials, F-ONE has developed HITEX, a new high tenacity polyester. Available in 158g, and exclusively for F-ONE in 178g, this new material is incredibly resistant to elongation and increases the durability of wings and kites.

HITEX is an innovative, high tenacity polyester fibre with an enhanced high-quality weaving and coating that increases the fabrics resistance. The 178g is a new weight and perfectly matches the needs of the centre strut and centre of its leading edge. The lighter 158g is used in the leading edge tips.

Used throughout the inflatable structure of the wings and kites and designed to handle the high pressures when inflating, HITEX offers performance and resistance. Thanks to extensive Sail Engineering work, the R&D team has placed each weight of HITEX in different areas allowing absolute control of the shape session after session.

TECHNOFORCE

TEIJINs TECHNOFORCE is the most reliable high density polyester fabric. Its tear-stopping structure using thin and high-tension yarn makes the fabric ultra-durable.

It has a great proven track record of lightness and durability.

REACTOR VALVE

The reactor inflation valve offers a high flow connection that twist locks the pump hose to the kite for an easy and super-fast inflation and deflation at the push of a button.

It provides a high air flow rate between the struts and leading edge.

SWEEP CONTROL PANEL

The Sweep Control Panel provides dynamic and precise control of the wings sweep angle by improving tension control. Thanks to this innovation, the trailing edge remains taut, guaranteeing stability, upwind abilities, speed and long-lasting performance overtime.

Running from wingtip to wingtip and designed with a more resistant fabric or material, this continuous panel reinforces the front part of the leading edge and helps control its rearward deformation, while maintaining lateral flex for comfort and energy transfer during pumping.

The specific construction of the leading edge, incorporating 2 or 3 different materials and weights depending on the wings model, allows for its stiffness and flex to be managed perfectly and naturally throughout the entire ride. The use of these 2 or 3 ideally placed materials also saves weight on the wing.